Sign in or 

|
joto1000 |
AT&T Fuze digitizer replacement
May 29 2009, 8:20 AM EDT
| Post edited: May 29 2009, 8:42 AM EDT
Does anybody know where to find a good resource on how to replace the glass screen (digitizer) on the AT&T Fuze? All of the service manuals I've found online stop short of those instructions. Thanks.
Do you find this valuable?
|
|
denco7 |
1. RE: AT&T Fuze digitizer replacement
May 29 2009, 10:46 AM EDT
"Does anybody know where to find a good resource on how to replace the glass screen (digitizer) on the AT&T Fuze? All of the service manuals I've found online stop short of those instructions. Thanks."You can check here, Mike has a wide array of guides http://www.mikechannon.net/ Do you find this valuable? |
|
joto1000 |
2. RE: AT&T Fuze digitizer replacement
May 29 2009, 2:20 PM EDT
"You can check here, Mike has a wide array of guidesI did but even the service manual stops short of showing how to separate the digitizer from the LCD. Any ideas? Thanks. Do you find this valuable? |
|
Sgarrela |
3. RE: AT&T Fuze digitizer replacement
May 29 2009, 3:45 PM EDT
"I did but even the service manual stops short of showing how to separate the digitizer from the LCD. Any ideas? Thanks."I found some very detailed disassembly info on Mike's site at http://www.mikechannon.net/PDF%20Manuals/HTC%20Raphael_SM_A10%20_GENERIC__01%20Dec%2008.pdf Most Fuze phones aren't that old. Is your Fuze still under warrantee? If you bought it from ATT less than 12 months ago, they will replace phones with hardware problems at no cost to you, unless it also has a broken screen. I had a problem with my Tilt after 15 months and they replaced it under warrantee even though it was technically out of warrantee after 12 months. Do you find this valuable? |
|
joto1000 |
4. RE: AT&T Fuze digitizer replacement
Jun 2 2009, 8:01 AM EDT
"I found some very detailed disassembly info on Mike's site atIt's only 5 mo old, but I cracked the digitizer when I shut my car door on it. Do you find this valuable? |
|
JustinPerez |
5. RE: AT&T Fuze digitizer replacement
Jun 18 2009, 9:16 PM EDT
and that didn't f up your lcd too?
Do you find this valuable?
|
|
joto1000 |
6. RE: AT&T Fuze digitizer replacement
Jun 19 2009, 9:42 PM EDT
"and that didn't f up your lcd too?"Nope. Just cracked the glass screen from top to bottom. The touch screen and lcd still work great. Do you find this valuable? |