Sign in or 
Location: Smartphone ROM's
Discussion: need shipped rom for SNAP S511(WILLOW)
Category:
Discussion Forum /
General Discussion
Share this
Showing 7 posts
|
billyzh |
|
talontsi07 |
1. RE: need shipped rom for SNAP S511(WILLOW)
Oct 10 2009, 1:51 AM EDT
I will work on it but it will be hard to find.
Do you find this valuable?
|
|
talontsi07 |
2. RE: need shipped rom for SNAP S511(WILLOW)
Oct 10 2009, 2:23 AM EDT
| Post edited: Oct 10 2009, 2:30 AM EDT
Sorry i could not find one. I will keep my eyes open and if I happen to find one I will add it to the Smartphone ROM's section.You can always try a cooked ROM Do you find this valuable? |
|
billyzh |
3. RE: need shipped rom for SNAP S511(WILLOW)
Oct 10 2009, 4:49 AM EDT
Thank you so much for your kind.
Do you find this valuable?
|
denco7 |
4. RE: need shipped rom for SNAP S511(WILLOW)
Oct 10 2009, 8:52 AM EDT
| Post edited: Oct 10 2009, 8:53 AM EDT
Unfortunately HTC and carriers do not release copies of roms, most copies are from people that have dumped their roms to help other people recover and re flash their phones. Unfortunately as the Willow is such a new phone, the tools to dump the rom have not been developed yet. Thus, there are no copies around.I don't think I understand the problem. What happens when you go to turn it on ? What was it doing or were you doing with the phone previous to it not working anymore. And why do you think it has something to do with a mising or corrupt rom ? Do you find this valuable? |
|
billyzh |
5. RE: need shipped rom for SNAP S511(WILLOW)
Oct 11 2009, 10:53 PM EDT
thank you talontsi07.I am a Chinese and used this phone in China, when I get the phone, I must change the original ESN and IMSI, AKEY which the device to my own, so, when I doing near ending, the device reboot, but only can turn on to the first page, it is showed "HTC SNAP", can't open continue. I have try to save it, but it seemed I can't turn it on: when I press the volume up + volume down + power, in the tri-color bootloader screen is "trigger ramdump mode",there is a "serial" showed on the bottom when I connect the phone to PC via usb, it will change to "USB", but the ActiveSync is can't identify the device. when I press volume down + power, in the tri-color bootloader screen is "CEDA200 SPL-0.34.0000 MICROP-WILLOW#C(LED) V58B",there is a "serial" showed on the bottom when I connect the phone to PC via usb, it will change to "USB", but the ActiveSync is can't identify the device too. And I have "cold-boot" it too:press volume down + send + power→ "this operation will delete all you personal date and reset all settings to manufacturer default press volup to restove manufacturer datault of press other keys to cancel " It can't save the device. I know before I ask for anyone, I must search my answer through the internet and I do it well, but I can't find the way to save my phone. I have find a 6.5 rom for it, but "It is HardSPL? Does the bootloader say 0.34.Hard? If not, you have to wait for an official ROM to be released." my S511 isn't HardSPL, and it is can't turn on, so I can't copy the JumpSPL.exe to it and can't flash any costom ROM in it. Cause my poor english, maybe you can't understand which I said full, anyway, thank you for your kind answer. Do you find this valuable? |
|
talontsi07 |
6. RE: need shipped rom for SNAP S511(WILLOW)
Oct 21 2009, 4:24 AM EDT
ActiveSync will not see your device when in the booloader screen, It is not suppose to.HardSPL is the bootloader. If you try to flash a custom ROM with the stock bootloader, it will reject it because its not the ROM intended for the device. So this is why you need a custom HardSPL so that it will allow you to flash a custom ROM. But I think you should figure out what went wrong before you use a custom ROM. Kinda like what denco7 was getting at. Do you find this valuable? |
